iStore Heat Pumps 180L
iStore Heat Pumps 180L
Offering premium efficiency and performance, the iStore 180 L - Air to Energy is the perfect choice for smaller homes that want the best in hot water all year round, powered by the sun's rays.
- iStores premium Australian engineering captures energy in the air to generate environmentally friendly hot water to multiple taps in your home - 24x7 x 365.
- The iStore uses advanced technology to store 4 kW of heat energy for every 1 kW of power consumed.
- The iStore consumes 75% - 85% less energy than conventional hot water systems.
- External wrap around heating coil provides maximum thermal energy transfer.
- The iStore offsets 2.9 tonnes of CO2 per-annum on an Australian average home.
- All-in-one integral unit, the iStore is easy and quick to install.
- Save thousands with federal and state Government incentives.
Availability:In stock
SKU IS-HEATP-180L
WATER HEATING COST COMPARISON
Heating hot water for your home accounts for up to a quarter of your electricity costs for the average Australian household.
The iStore reduces hot water heating consumption by two thirds from conventional electric or gas storage systems, while reducing CO2 emissions by 2.9 tonnes.
Installing an iStore could save you up to $1,000* per year on your energy bills.
Tariffs based on WA pricing, $0.25 per kWh for electricity, Natural Gas price of $0.0351 c/MJ & LPG price of 1.25 $/L. Actual savings may vary on household usage, solar power system and climate conditions.
A significant reduction in running costs while providing a sustainable source of hot water.
The iStore reduces energy consumption by two thirds when compared to conventional electric or gas storage systems, all while reducing the Co2 emissions of your home by as much as 2.9 tonnes annually.
The 180L iStore uses exclusive technology to provide 400% efficiency
- A fan draws in air, containing heat energy, across the evaporator
- The evaporator turns the liquid refrigerant into a gas
- The compressor pressurises the refrigerant into a hot gas
- The hot gas inside the condenser coil heats the water inside the coil-wrapped tank
- The refrigerant reverts back to a liquid after heating the water and continues to the evaporator for the process to start again
Dimensions |
|
| Height | 1956 mm |
| Diameter | 540 mm |
| Height to water inlet | 60 mm |
| Height to water outlet | 1240 mm |
| Hot water condensation | |
| Height to PTR valve. | |
| Height to anode | 1140 mm |
| Net weight | 93 kg |
Warranty Information |
|
| Cylinder | 5 years |
| Refrigeration & electrical | 5 years |
| Valves or Accessories | 1 year |
STC Values by Zone |
|||||
| Zone | 1 | 2 | 3 | 4 | 5 |
| STC's | 20 | 18 | 24 | 25 | 25 |
