GLOBAL LEADERS IN SOLAR POWER TECHNOLOGY
Founded in 2001, Suntech are world renown for their quality and expertise.Through devotion to research and development, Suntech have continued production of crystalline silicon solar cells and modules for over 24 years, shipping to over 100 countries worldwide with a cumulative total of shipments over 50 GW. Their mission is to be the most trusted PV company throughout the world, delivering continuous innovation and standard of excellence.
24 Years of Innovation
Since 2001, Suntech have been producing crystalline silicon solar cells and modules.
50 Giga Watts
Global cumulative shipments of Suntech modules worldwide.
Research & Development
Over 600 authorised patents attributed to Suntech.
Global Leading Solar
Trusted for innovation and excellence across 100+ countries worldwide.
NOT YOUR AVERAGE SOLAR PANEL
Extensively tested, Suntech solar modules are a cut above the rest and make the most of the sun. In fact, under identical conditions, Suntech products perform up to 16% better than competitor brands, generating more solar energy from the same sunlight.
Ultra V series
Higher & Reliable Energy Density
- Large format 182mm silicon wafer with module efficiency up to 21.3%.
- MBB & High Density package technology increases max power beyond 670W.
- Lighter and thinner with more than 15% weight reduction.
- MBB & Half-Cell Technology increases max power beyond 550W.
Ultra X series
Higher Power, Lighter Weight
- Large format 210mm silicon wafer with module efficiency up to 21.3%.
- Multi busbar technology allow 50% decrease in current transversal propagation.
- Improve power generation with backside generating up to 25% electricity.
- Lower overall cost with higher ROI.
Ultra V Pro series
Higher Power, Lighter Weight
- Suntech Ultra V Pro products use 182mm large N-type silicon wafers with cell efficiency over 25.0% . Also it has zero-LID performance which greatly enhances module power.
- Simultaneous introduction of double-sided modules, the power can be increased to 580 W+.
- The Ultra V Pro is the best solution to have a compact product with high power/㎡
- LCOE is 5% lower compared to the same type of PERC modules.
- Module power temperature coefficient as low as -0.29%/°C, module power generation is 3-4% higher than PERC.
25YR POWER OUTPUT WARRANTY
Suntech guarantee a 97% power output in the first year, with nominal output decrease of no more than 0.7% through to the module’s 25th service year. This guarantees that up to the 25th year of operation, the module will output a minimum of 80.2% nominal power.
25YR PRODUCT WARRANTY
TESTED TO WITHSTAND EXTREME CONDITIONS
Ensuring sustainable power throughout the harshest of environments including desert, farmland and coastline, Suntech modules undergo up to 52 rigorous quality assurance tests. Further to this, they are sent to world-leading 3rd party test laboratories, including VDE and IEC and reinsured by MunichRE.
Module Efficiency
Highly efficient cell technology converts as much energy as possible from valuable roof space exceeding 18% in rated efficiency.
PID Resistant
Using high-volume resistant EVA, Suntech boost PID resistance by limiting sodium ion movement from cell surface to glass.
Performance Consistency
Suntech’s patented “Edge Insulation” boasts performance on cloudy or winter days.
Positive Power Tolerance
Each module produced is designated a power class which, if used together, can generate a boost of up to 2% in output.
Tested for Extreme Conditions
Built to withstand a min wind speed of 162km/h, more than 30 km/h above IEC’s minimum safety factor requirement.
Enhanced Hail Test
Built with wider cavity frames, Suntech modules can take the impact of hailstones up to four times their weight at a greater velocity than standard IEC testing.
- World leading certification in hail test, able to endure 45mm particle size at a speed of 30.7m per second.
- Sand Blow test assesses durability for desert conditions. Modules assessed at a temperature of 63 ±2, Particle size average of 250µm with wind speed at 9 ±2 m/s - equivalent to conditions in Saudi Arabia
- High resistance when mechanically tested for wind & snow conditions by VDE. The Wind test, module rated at 3800 Pa (~ 162 km/h) and Snow test module rated 5400 Pa (~ 550 kg/m²) both of which meet or exceed IEC requirements.